• Your shopping cart is empty!

  • YOSUN replacement Projector lamp bulb with same functioning as your original one. Perfectly match and compatible for your Projector.
  • FEATURES: It is the lamp with housing, not only a bare bulb. Same as bright and durable lamp wick as the original bulb.
  • COMPATIBLE MODULES: fit for SmartBoard Unifi70 Unifi70w UF70 UF70w LIGHTRAISE 60WI2 SLR60wi2 SLR60wi2-SMP SB600i6 Projector
  • INSTALLATION AND SAFTY: You will find it is quite easy to install it into your Projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well.
  • WARRANTY AND RETURN: New replaced lamp will be shipped to you when your bulb was out of work naturally in 180 days. Refundable issue, please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.
  • <P><b>Parameter: </b><br><P> YOSUN new replacement Projector bulb with housing. <br> Perfect match is only applicable to your correct Projector model. <br> Lamp Life: 3000-4000 hours<br> <P><b>COMPATIBLE MODULES:</b><br><P> fit for SmartBoard 1020991 Unifi70 Unifi70w UF70 UF70w <br> LIGHTRAISE 60WI2 SLR60wi2 SLR60wi2-SMP SB600i6 Projector<br> <P><b>Warm Noted: </b><br><P> Be sure to use an 1020991 Projector Lamp for replacement. <br> Be sure to turn off the unit and unplug the power cord before replacing the lamp<br> The lamp remains hot after the unit is turned off with the TV. <br> If you touch the lamp, you may burn your fingers. When you replace the lamp<br> Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp<br> If you touch it, wipe off the fingerprints with a soft cloth<br> <P><b>Installation: </b><br><P> 1. Turn off the Projector and unplug the AC power cord. <br> 2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover. <br> 3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out. <br> 4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws. <br> 5. Close the lamp cover, and then tighten the screws<br> 6. Plug in the AC power cord. <br>

Write a review

Note: HTML is not translated!
    Bad           Good

YOSUN 1020991 Replacement Projector Lamp for SmartBoard Unifi70 Unifi70w UF70 UF70w LIGHTRAISE 60WI2 SLR60wi2 SLR60wi2-SMP SB600i6 Projector Lamp Bulb with Housing

  • Brands YOSUN
  • Product Code: 1020991
  • Availability: In Stock
  • First Available: 2001-02-08

  • $152.00

  • Ex Tax: $152.00

0 reviews / Write a review